Capture and a control of emissions is accomplished by creating air movement. Every type of fan design can be used to move air through a filter or process scrubber. The fans can be installed on the clean side of the capture device which calls for NYB Junior, General Purpose or AcF/PLR/BC designs. Dirty air fans for capture devices would require NYB General Industrial or RTS designs. These capture devices can be designed for continuous operation or shut down regularly for cleaning. Occasionally the air is corrosive or contains abrasive particles and would require special construction to resist wear.
Bearings and motors isolated from the process. Shaft seals with ceramic felt elements.
|Available Materials of Construction:||